Automatic Drywall Taper Creaser Spring Replacement

Follow along with LEVEL5 Tools’ lead technician Robby Deatherage as he shows you how to change your creaser spring in less than one minute. All you need is a flathead screwdriver and a pair of needle-nose pliers to get your creaser wheel back in action.

Changing the Creaser Spring of the L5 Automatic Drywall Taper

As most know, when applying drywall tape, the creaser wheel on the taper is extended out and used to apply drywall tape into corners or to reinforce the placement of tape on ceilings. Over time the spring that engages the creaser will lose it’s tensile strength to the point where it no longer functions properly.

Although we stand behind the rock-solid and industry leading 7-year warranty we put on all of our automatic taping & finishing tools, we believe it’s important that the finisher should be able to easily repair or replace the parts most prone to wear. That’s why we have designed the creaser spring, as well as every other high-wear part of the LEVEL5 Tools automatic drywall taper to be easy to repair. With extremely affordable replacement springs, all that is needed is a screwdriver and a pair of pliers to get back up and applying drywall tape to corners and ceilings in no time!

Finisher First

At LEVEL5 Tools, the finisher comes first, and that’s why we not only make the most affordable, premium automatic drywall taper on the market but we also offer an industry-leading 7 Year Warranty and an amazing customer service policy that can’t be beat!

For more guides, tips and tricks on drywall taping check out some of the articles below and make sure to subscribe to our YouTube channel.